Introduction: Why Everyone Is Talking About TWS Mode

Need more sound and richer audio without investing in a big speaker? That’s exactly why TWS mode is getting so much attention. TWS (True Wireless Stereo) also allows two similar Bluetooth speakers to be wirelessly connected. This helps create a wider audio experience. 

This uses two speakers operating in tandem to play channels, rather than just one speaker. This is a feature of some Portronics products, including Thunder 2.0 and Iron Beats II, so you can always add on to your sound system. Learn about TWS, how it works, and how to activate it on Portronics speakers. We’ll also cover common pairing issues and the best ways to use this feature.

What is TWS Mode?

TWS can be abbreviated to True Wireless Stereo. It enables you to use two similar speakers as a single wireless Bluetooth.

One speaker transmits the left audio, and the other the right. The separation allows you to hear a richer, clearer, and more balanced sound. They offer more output and a broader soundstage that takes up the space and sounds more dynamic: it's a more exciting sound than a single speaker.

TWS Mode vs Regular Bluetooth Connection

Regular Bluetooth:

With a typical Bluetooth connection, your phone pairs with just one speaker. All sound comes from that single source. The sound is good but without true stereo separation and a narrow soundstage (particularly in large rooms).

TWS Mode:

TWS gives you a much more immersive setup. The first speaker connects to your phone automatically, then the second speaker pairs wirelessly. This lets each speaker handle its own dedicated channel—one left, one right—for balanced and immersive sound. And it's wireless, eliminating all the cable clutter.

How TWS Mode Works? 

TWS is achieved by having a master (host) speaker. The other one is paired with it via a TWS protocol. Audio is then automatically split between left/right channels for wireless stereo.

It provides immersive stereo audio for today's devices. For newer Bluetooth 5.3-compatible Portronics speakers, it establishes a faster and more stable connection - resulting in a stronger and clearer sound. It's ideal for bigger rooms, for parties or outdoor use with stereo sound.

How to Enable TWS Mode in Portronics Speakers (Step-by-Step)

To wirelessly connect two Portronics Bluetooth speakers in True Wireless Stereo (TWS) mode for dual stereo sound, follow these simple steps:

• Step 1: Turn ON Both Speakers — Power on two identical Portronics speakers (e.g., two SoundDrum 1 or two Thunder 2.0 units) and ensure they are not connected to your phone's Bluetooth yet.
• Step 2: Activate TWS Mode — On one speaker, press and hold the TWS button (or double-press the Mode button) until you hear a chime or see the LED indicator light blinking rapidly.
• Step 3: Wait for Auto-Pairing — The two speakers will automatically connect to each other within 3 to 5 seconds. You will hear a confirmation beep indicating they are paired in stereo.
• Step 4: Connect to Your Phone — Open Bluetooth on your phone, find the Portronics speaker model name under available devices, and tap to connect. Music will now stream across both speakers in true left and right audio channels.

How to Exit TWS Mode

To switch off TWS, press the TWS button again or power off one of the speakers.

Popular Portronics Speakers That Support TWS

Thunder 2.0 – 60W HD Party Speaker with TWS

Thunder 2.0 offers 60W high-definition (HD) audio with clear audio and low bass for outside and inside, for your indoor and outdoor enjoyment. The Bluetooth 5.3 offers a stable and fast connection for playback. You can party and travel with it as it is splash-proofed (IPX6). Its interactive lights in RGB beat along to the music and delivers a great ambience.  If you want to have a more immersive stereo experience and are willing to spend more, then pair two Thunder 2.0 speakers in TWS mode.

SoundDrum 1 – 10W Portable Bluetooth Speaker with TWS

The SoundDrum 1 is designed for everyday portable music and outdoor travel. It delivers a punchy 10W bass output with Type-C fast charging in a compact, pocket-friendly design. With smooth Bluetooth connectivity and a built-in hands-free mic, it is perfect for casual listening, work desks, and study sessions. If you want a wider, louder soundstage, simply pair two SoundDrum 1 speakers in TWS mode to enjoy 20W dual stereo sound wherever you go.

Fynix Mini – 20W Wireless Speaker with TWS

The Fynix Mini portable speaker is built for dynamic audio performance on the move. It features 20W output backed by passive bass radiators for deep, rich low frequencies. Its compact, rugged build and long-lasting battery make it ideal for picnics, road trips, and small gatherings. In TWS mode, you can connect two Fynix Mini units wirelessly to create an expansive 40W stereo soundstage with complete left-right channel separation.

Iron Beats II – 250W Wireless Party Speaker with TWS

The Iron Beats II party speaker is made for high-energy events. It has an impressive 250W HD output with powerful bass and loud sound. The 8-inch subwoofer provides amazing sound to a party or meeting. The wireless karaoke microphone is ideal for you to sing without restrictions and the echo feature lets you adjust the voice.  Dynamic RGB lights create a festive atmosphere. In TWS mode, you can pair two units for richer, immersive stereo sound.

Iron Beats IV – 250W Party Speaker

The Iron Beats IV produces a high 250W output sufficient for large gatherings and outdoor events. It comes with two 6-inch subwoofers that give it deep punchy music and full immersion. The speaker includes a wireless karaoke mic, ideal for singing sessions and event organization. The dynamic RGB lights go in step with the music to enhance a party. It has seamless playback with Bluetooth 5.3 and various connectivity options. TWS-enabled pairing allows connecting two speakers for bigger stereo sound.

When Should You Use TWS?

TWS is the best mode of getting a louder, broader sound with no messy wires. It works best in house parties, birthdays, and any occasion where you are in need of a balanced sound with greater coverage. TWS enhances the experience at terrace parties and wedding celebrations, as well as dance practices or gym stations. It connects two speakers, providing a more powerful voice, stereo separation, and more immersive and energetic sound.

Placement Tips for Maximum Stereo Effect

For optimal sound, keep the speakers at the same height and pointed in the direction of the audience with plenty of room for the sound to travel unobstructed by a wall (which could distort the low frequencies and produce a fuzzy sound).  This spacing creates good stereo separation. Do not set them too close to the walls; they will distort the bass, and they will make it less clear. Moreover, keep a moderate distance between other gadgets in order to get a stable connection on Bluetooth. These simple adjustments lead to clearer and more immersive sound.

Common TWS Pairing Issues & Fixes

Issue 1: Speakers Not Pairing

In case your speakers cannot connect when using TWS mode, be sure that they are similar. TWS usually works only between identical models. Make sure both speakers are close together and TWS mode is enabled on each. Reboot the two devices and repeat the Portronics TWS speaker pairing process to ensure a successful connection.

Issue 2: Audio Delay

Assuming that you can hear your TWS Bluetooth speakers, it could be due to other wireless devices. Disconnect (unpair) any other devices via Bluetooth and retether the speakers. Turn back on the Bluetooth of your phone. Know how to pair TWS speakers: it will make the connection lag-free so that the sound will be more smooth.

Issue 3: Only One Speaker Playing

When only one speaker is connected, switch off TWS mode and pair them together again. It is advisable to pair your phone with the primary speaker since it pairs the speakers in TWS mode. Repairing both speakers should work also. 

Two Speakers or One Big Speaker?

Two TWS Speakers

When in a TWS, the two speakers will collaborate to produce the real wireless stereo sound, where the left and right channel will be distinct. It provides more sound stage and sound immersion. Such a set up is ideal for both indoor and outdoor rooms, or large parties where the sound needs to cover the entire room. And more flexibility in speaker placement leading to a better coverage and sound distribution within the room.

One High-Power Speaker

One-powerful-speaker setup is simpler with focused sound. It is ideal for compact spaces or when the audience is facing the speaker. It's simpler to use, less fuss to set up and can be more affordable, and still provides good, reliable sound.

Smart Usage & Battery Tips in TWS Mode

Use different tips to optimise your TWS speakers. So ensure you keep the batteries of both the speakers charged equally to avoid desynchronisation and poor audio experience. Make sure the volume is low and avoid the maximum volume level for long periods of time as it will reduce the performance and can cause damage to speakers.

Also, keep the batteries of your speakers at high level for using TWS mode, otherwise it could lead to call or connection drop. Once you have finished using TWS mode, it's important to turn it off or to turn off the speakers. This will ensure a longer battery life and better performance for the next time you connect TWS.

Conclusion

TWS is one of the easiest ways to improve your audio system. When you connect two similar speakers, you will experience increased volume, improved balance, and enhanced stereo effect. Whether it’s Holi celebrations or a birthday/terrace party or just playing music for yourself, you can expect great and balanced audio from the TWS speakers.

Portronics TWS speakers are made to make things convenient, providing effortless pairing, as well as excellent functionality. For people interested in improving their audio experience, check out TWS speakers range on our website.

Frequently Asked Questions on TWS Mode

1. Can I pair two different Portronics speaker models together in TWS mode?

No. For TWS (True Wireless Stereo) mode to work properly, you need two speakers of the exact same model (for example, two SoundDrum 1 units or two Fynix Mini units). Identical hardware is required so that the audio decoders and latency sync in perfect harmony.

2. What is the maximum distance allowed between two speakers in TWS mode?

For a stable, uninterrupted stereo connection with zero audio lag, it is recommended to keep both speakers within 5 to 10 meters (15 to 30 feet) of each other, without thick walls or large metal obstacles in between.

3. Does TWS mode work when playing music via an AUX cable or USB drive?

TWS mode is primarily designed for Bluetooth wireless streaming. On select Portronics models, connecting an AUX cable or USB pendrive to the master host speaker will wirelessly bridge audio to the second slave speaker. Check your specific model’s user manual for input bridging support.

4. How do I disconnect or exit TWS mode?

Exiting TWS mode is simple. Just press and hold the TWS button (or double-press the Mode button) on either speaker, or simply power off one speaker. The other speaker will immediately return to standard single-speaker Bluetooth mode.

5. Does TWS mode drain the speaker battery faster?

Not noticeably. Both speakers run on their own internal batteries and play dedicated audio channels. The master speaker uses an imperceptible amount of extra power to maintain the wireless link, but playtime remains virtually identical to regular Bluetooth use.